World Class Blades Now in Kenya
Magicut Blades are world class blades introduced in Kenya by Devsons Industries Limited.
Proper selection of blade.
While selecting a blade “Three Teeth Rule” should be followed and this requires that during cutting a minimum of three teeth be continuously in contact with the work.
Thin Section
Use a fine tooth blade or else metal wedges up between teeth, stripping them off, if the sector is too thin to follow the “Three Teeth Rule” use a very light steady stroke.
Thick Section
Use a coarse tooth blade with heavy pressure. This gives greater pressure per tooth and consequently a deeper cut. The larger space between teeth gives ample chip clearance.
Hard Sections
Special care must be taken when cutting harder materials. It is better in terms of blade life to use finer tooth blades, with a light pressure and slower speed of cutting or else heat is built up rapidly on the cutting edge causing the metal to soften even in the case of High Speed Steel blades. Faster speeds are permissible if a coolant is used.
Other Magicut Products.
- Power Hacksaw Blades
- Toolbits
- Carbon Steel band Saw blades
- Bimetal Holesaws, Holesaw Accessories & Kits,
- Air Saw Blades
- Reciprocating Saw Blades
- Junior Hacksaw blades & frames.
